Stereo Interconnect RCA-XLR

H10U005642

MSRP:

€190.00

Specify length

In Stock

Product information "Stereo Interconnect RCA-XLR"

DIYclassD Interconnects are the best protected audio signal cables in the industry. Connecting your audio devices with High-End cables can now be done for a very affordable price. The DIYclassD Interconnects are Custom-made double shielded twisted-pair cables, specifically designed for the highest RFI immunity and lowest microphonic noise.

DIYclassD RCA-XLR Interconnects are the perfect link between our DIY PreAmplifier, DIY power amplifiers or active (fusion amp powered) loudspeakers. The RCA - XLR interconnects have rhodium plated RCA connectors and silver plated XLR connectors to guarantee an optimal, uncolored signal transmission. DIYclassD Interconnects are the best protected audio signal cables in the industry because of their Silver-plated conductors with PTFE tape-wrapped insulation, glass-fibre stabilisers and two layers of braided shield over a bonded carbon triboelectric charge drain layer.

Available in 1m and 2m.

Highlights

Double shielded twisted-pair cable
Silver plated conductors
PTF tape-wrapped insulation
Glass-fibre stabilisers
Highest RFI immunity
Lowest microphonic noise

What's in the box

1 pair (2pieces) of RCA - XLR cables

Recommended additional parts

NEW!

DIY PreAmplifier

Build yourself a state-of-the-art high-end preamplifier with this DIY kit by DIYclassD. With the easy to follow instructions you will be able to realize a high-end PreAmplifier at a fraction of the cost and all of this can be done in just 30-60 minutes. Combined with our DIYclassD Nilai® power amplifiers kits you can make a complete set of superbly sounding equipment. All you need to bring to the table is this box and a few basic tools: • 7 mm hex nut driver (or combination plier) • Wire cutter (or combination plier) • 3.5 mm flat type screwdriver • 5.5 mm hex nut driver (or combination plier) Highlights: • Fully analogue • 2.7” monochrome OLED display • Remote control included • Modular design • Discrete op-amps & voltage regulators Future add-on options: • DAC (AES, SPDIF, Optical, USB, Bluetooth) • Phono stage • Equalizer • Streaming option This kit contains: • Complete DIYclassD PreAmplifier case “matte black” • Complete internal cable harness • Power supply, front board, main board and headphone board • All needed mounting materials • Assembly instructions • 1.5mm Allen key • TX-10 Torx key • TX-20 Torx key • Remote Control (incl. battery)

€1,225.00