FusionAmp FA122

H05U003261

€352.00

Product information "FusionAmp FA122"
This FusionAmp can be the basis of e.g. a powerful active subwoofer or a two-way monitor. The FA122 has two 125 Wrms Ncore® amplifiers which can also be bridged to form one powerful 250 Wrms amplifier.

Connections

  • Analogue balanced XLR in and through
  • Analogue unbalanced RCA input
  • Digital AES in and through
  • Digital S/PDIF in and through
  • Digital Optical TosLink input
  • USB 2.0 configuration interface

Features

  • 15 biquads per amplifier
  • Three selectable presets for filters
  • Source selection
  • Signal detect
  • Auto shutdown
  • BTL capable
  • Clip protect
  • Thermal protect
  • Filter protection

What is included in the box

  • The FA122
  • A printed copy of the user guide
  • Speaker connection cables

Power (4Ω): 2 x 125W
Power (8Ω): 2 x 75W
Channels: 1 channel / 2 way
Technology: NCORE®
Family: Fusion Amp Family
Mains voltage input: 100-120Vac / 200-240Vac ±10%

Recommended additional products

Hypex Filter Design
Hypex Filter Designer (HFD) is a program to configure Hypex Electronics B.V. DSPmodules. This software is only available for Windows. Download only The Hypex Filter Designer is free of charge and only available as a download. You can select and download the software and documentation from within the downloads tab on this page. HFD v4 software consists of the following areas: Main Screen Device settings screen Filter design graphical screen Filter design advanced screen The general functions of HFD are: Volume Control Mute (global and per channel Channel assignment Subout Control Load measurements for speakers (Impulse response) Take measurements Input gain adapt Load/apply microphone correction data Stepresponse/Impulseresponse/Magnitude View sum of filters Invert filter functions Delay Graph smoothing Wide range of Biquad filter setups

€0.00
Details
Hypex Remote control
The Hypex Remote control is a remote control which can be used in combination with the DLCP add on set or the Fusion Amp remote kit to control volume, source and put the system into standby. A battery is included.

€10.00
Fusion Remote Kit
All models of the FusionAmp range can be extended with this Fusion Remote Kit. This set contains a PCBA with IR receiver and bi-colour LED, a plexiglas front with double adhesive tape, 2 lightpipes ,the necessary cable (125cm) and screws.You can mount this kit from the inside or outside of the speaker cabinet.This set must be used in master devices if the Hypex remote is to be used (remote not included). Furthermore, this set can also be added in slave devices, but the IR functionality will be disabled. The green LED acts as on-off indicator, the red LED mirrors the protect indicator. includes: - Screws- PCBA with IR receiver, bi-colour LED- Plexiglas front- sheet of double adhesive tape- 2pcs light pipes- 5 pin cable 125cm

€21.00
Fusion Mounting Screws
The FusionAmp models must be mounted into the speaker cabinet with 8 or 10screws. This set contains 10 self tapping, black, Phillips head screws, 4,3x25mm.

€3.15
Fusion OLED Display
All models of the Fusion Amplifier Family and the DSP3-213 can be extended with the Fusion OLED Display. The Fusion OLED Display will show you all the relevant information such as volume level, active input and preset and will show you all error messages. All messages are very well readable from your listening position. You can mount this Display from the outside of the speaker cabinet. the Display is already fitted with double adhesive tape for assembly in your speaker cabinet. This Display must be used in master devices if the Hypex remote is to be used (remote not included). Furthermore, this Display can also be added in slave devices, but the IR functionality will be disabled. includes: Fusion OLED Display 5 pin cable 125cm Manual

€65.00
Power cable black Euro-IEC 60320 C13
Mains power cable to connect your products with IEC 60320 C13 and Euro connection.

€6.00
Power Cable Black US-IEC 60320 C13
Mains power cable to connect your products with USA and IEC 60320 C13 connection.

€6.00