DIY Amplifier Kits

Build yourself a state-of-the-art high-end preamplifier with this DIY kit by DIYclassD. With the easy to follow instructions you will be able to realize a high-end PreAmplifier at a fraction of the cost and all of this can be done in just 30-60 minutes. Combined with our DIYclassD Nilai® power amplifiers kits you can make a complete set of superbly sounding equipment. All you need to bring to the table is this box and a few basic tools: • 7 mm hex nut driver (or combination plier) • Wire cutter (or combination plier) • 3.5 mm flat type screwdriver • 5.5 mm hex nut driver (or combination plier) Highlights: • Fully analogue • 2.7” monochrome OLED display • Remote control included • Modular design • Discrete op-amps & voltage regulators Future add-on options: • DAC (AES, SPDIF, Optical, USB, Bluetooth) • Phono stage • Equalizer • Streaming option This kit contains: • Complete DIYclassD PreAmplifier case “matte black” • Complete internal cable harness • Power supply, front board, main board and headphone board • All needed mounting materials • Assembly instructions • 1.5mm Allen key • TX-10 Torx key • TX-20 Torx key • Remote Control (incl. battery)

Nilai® Class D technology is here! We have taken our existing control-loop topology to a whole new level resulting in an immense performance upgrade compared to NCORE®. The overall performance has increased by not less than 10 times! This massive performance boost results in distortion figure that are 10 times lower, a power supply noise rejection that is 10 times higher and a reduced output impedance that has dropped by a factor 10. These figures may already sound incredible, wait until you hear them come alive through your speakers!  APPLICATIONS High-end power amplifiers  FEATURES 2x250W / 4Ohm THD+N: 0,00015% (-116dB) @ 100W / 4Ohm / 20.000Hz Output noise: 9,5µV @11,8dB gain Gain adjust in 3 steps (11,8 - 21,8 and 27,8) High fidelity components Discrete buffer stage and regulators Dedicated high-end power supply PS500DIY includedAlso available in 500W mono kit CONTENTS OF PACKAGING Complete stereo case 2x Nilai500DIY amplifier module 1x PS500DIY Power SupplyComplete internal cable harness Complete mounting set Nilai500DIY stereo kit user assembly guide Nilai500DIY stereo kit user manual 

/Nilai® Class D technology is here! The Nilai500DIY is the long-awaited successor to the acclaimed NC400. Its polished shiny exterior is true reflection of what is to be found inside. The engine room houses a brand new control-loop topology that really boosts performance to the next level. It outperforms Ncore by not less than 10 times! The module comes with a fully discrete buffer stage and on-board voltage regulators, just like the NC400 it’s replacing. Together with carefully selected high-grade components, the Nilai500DIY is our best sounding amplifier to date. We have created a truly special technique which sets a new benchmark for high-end audio applications and is a truly unique amplifier module for our DIY community. Combining the Nilai500DIY with the matching PS500DIY will result in the best possible ready-to-go DIY-experience possible! With the easy to follow instructions you will be able to realize a high end power amplifier at a fraction of the cost and all of this can be done in just 30-60 minutes. Combined with our DIYclassD PreAmplifier kit you can create a complete set of superbly sounding equipment. All you need to bring to the table is this box and a few tools: • Wire cutter (or combination plier)• 5.5 mm hex nut driver (or combination plier) • 7 mm hex nut driver (or combination plier) • 3.5 mm flat type screwdriver Warranty: 5 years / 20.000h Key Features Ultra Low Distortion Very Low Idle Power Very Low Noise Very Low Output Impedance Incorporates Audiophile Components Specifications: Inputs 1 x Trigger 12V 1 x Balanced XLR Outputs 1 x Goldplated Bindingpost Set (Banana plug, Spade plug or Bare wire) This kit contains: Complete DIYclassD Nilai500DIY mono case “matte black”, Complete internal cable harness, PS500DIY power supply, Nilai500DIY amplifier module, Inputboard & Frontboard, All needed mounting materials, Assembly instruction, 1.5mm Allen key, 2.5mm Allen key, TX-10 Torx key, TX-20 Torx key

The DIYclassD UcD180 stereo kit is probably the best and most easy way to get a high-end HiFi system in your living room for a very affordable price. The KIT is designed with an easy to use mindset. Anyone can build it and enjoy the sound in the shortest time possible. Everything is there: 2pcs UcD180 with HxR, SMPS400A180, chassis, cables. You don't even need to solder, we did it for you.Internal size: 193mm(W) x 58mm(H) x 265mm(D)External size: 200mm(W) x 79mm(H) x 280mm(D) (size incl feet, excl connectors)THIS KIT CONTAINSComplete Hypex DIY case2pcs UcD180HG with HxRSMPS400A180Complete internal cable harnessMounting plateAll required connectorsAll required mounting materialsComplete comprehensive manual    NOT INCLUDED IN THE KITPower cableLoudspeaker cablesInterconnectsTools as described in the manual

The DIYclassD UcD400 stereo kit is probably the best and most easy way to get a high-end HiFi system in your livingroom for a very affordable price. The KIT is designed with an easy to use mindset. Anyone can build it and enjoy the sound in the shortest time possible. Everything is there: 2pcs UcD400 with HxR, SMPS400A400, chassis, cables. You don't even need to solder, we did it for you.Internal size: 193mm(W) x 58mm(H) x 265mm(D)External size: 200mm(W) x 79mm(H) x 280mm(D) (size incl feet, excl connectors)THIS KIT CONTAINSComplete Hypex DIY case2pcs UcD400HG with HxRSMPS400A400Complete internal cable harnessMounting plateAll required connectorsAll required mounting materialsComplete comprehensive manual    NOT INCLUDED IN THE KITPower cableLoudspeaker cablesInterconnectsTools as described in the manual