Stereo Interconnect RCA-XLR 1m

H10U005642
MSRP:
€190.00
Specify length
In Stock
Product information "Stereo Interconnect RCA-XLR 1m"

DIYclassD Interconnects are the best protected audio signal cables in the industry. Connecting your audio devices with High-End cables can now be done for a very affordable price. The DIYclassD Interconnects are Custom-made double shielded twisted-pair cables, specifically designed for the highest RFI immunity and lowest microphonic noise.

DIYclassD Interconnects are the perfect link between our DIY PreAmplifier, DIY power amplifiers or active (fusion amp powered) loudspeakers. The RCA - XLR interconnects have silver plated plated connectors to guarantee an optimal, uncolored signal transmission. DIYclassD Interconnects are the best protected audio signal cables in the industry because of their Silver-plated conductors with PTFE tape-wrapped insulation, glass-fibre stabilisers and two layers of braided shield over a bonded carbon triboelectric charge drain layer.

Available in 1m and 2m.

Highlights:

  • • Double shielded twisted-pair cable
  • • Silver plated conductors
  • • PTF tape-wrapped insulation
  • • Glass-fibre stabilisers
  • • Highest RFI immunity
  • • Lowest microphonic noise

What's in the box:

  • • 1 pair (2 pieces) of RCA - XLR cables

Recommended additional parts

NEW!
DIY PreAmplifier
Build yourself a state-of-the-art high-end preamplifier with this DIY kit by DIYclassD. With the easy to follow instructions you will be able to realize a high-end PreAmplifier at a fraction of the cost and all of this can be done in just 30-60 minutes. Combined with our DIYclassD Nilai® power amplifiers kits you can make a complete set of superbly sounding equipment. All you need to bring to the table is this box and a few basic tools: • 7 mm hex nut driver (or combination plier) • Wire cutter (or combination plier) • 3.5 mm flat type screwdriver • 5.5 mm hex nut driver (or combination plier) Highlights: • Fully analogue • 2.7” monochrome OLED display • Remote control included • Modular design • Discrete op-amps & voltage regulators Available add-on options: • DAC (AES, SPDIF, Optical, USB, Bluetooth) • Streaming option Future add-on options: • Phono stage • Equalizer This kit contains: • Complete DIYclassD PreAmplifier case “matte black” • Complete internal cable harness • Power supply, front board, main board and headphone board • All needed mounting materials • Assembly instructions • 1.5mm Allen key • TX-10 Torx key • TX-20 Torx key • Remote Control (incl. battery)

€1,225.00
NEW!
Nilai500DIY 500W mono power amplifier kit
/Nilai® Class D technology is here! The Nilai500DIY is the long-awaited successor to the acclaimed NC400. Its polished shiny exterior is true reflection of what is to be found inside. The engine room houses a brand new control-loop topology that really boosts performance to the next level. It outperforms Ncore by not less than 10 times! The module comes with a fully discrete buffer stage and on-board voltage regulators, just like the NC400 it's replacing. Together with carefully selected high-grade components, the Nilai500DIY is our best sounding amplifier to date. We have created a truly special technique which sets a new benchmark for high-end audio applications and is a truly unique amplifier module for our DIY community. Combining the Nilai500DIY with the matching PS500DIY will result in the best possible ready-to-go DIY-experience possible! With the easy to follow instructions you will be able to realize a high end power amplifier at a fraction of the cost and all of this can be done in just 30-60 minutes. Combined with our DIYclassD PreAmplifier kit you can create a complete set of superbly sounding equipment. All you need to bring to the table is this box and a few tools: • Wire cutter (or combination plier)• 5.5 mm hex nut driver (or combination plier) • 7 mm hex nut driver (or combination plier) • 3.5 mm flat type screwdriver Warranty: 5 years / 20.000h FEATURES: • Ultra Low Distortion • Very Low Idle Power • Very Low Noise • Very Low Output Impedance • Incorporates Audiophile Components SPECIFICATIONS: Inputs • 1 x Trigger 12V • 1 x Balanced XLR Outputs • 1 x Goldplated Bindingpost Set (Banana plug, Spade plug or Bare wire) THIS KIT CONTAINS: • Complete DIYclassD Nilai500DIY mono case “matte black”, • Complete internal cable harness, • PS500DIY power supply, • Nilai500DIY amplifier module, • Inputboard & Frontboard, • All needed mounting materials, • Assembly instruction, • 1.5mm Allen key, • 2.5mm Allen key, • TX-10 Torx key, • TX-20 Torx key Also available in a 2 x 250W stereo kit 

€820.00
NEW!
Nilai500DIY 250W stereo power amplifier kit
/Nilai® Class D technology is here! The Nilai500DIY is the long-awaited successor to the acclaimed NC400. Its polished shiny exterior is true reflection of what is to be found inside. The engine room houses a brand new control-loop topology that really boosts performance to the next level. It outperforms Ncore by not less than 10 times! The module comes with a fully discrete buffer stage and on-board voltage regulators, just like the NC400 it's replacing. Together with carefully selected high-grade components, the Nilai500DIY is our best sounding amplifier to date. We have created a truly special technique which sets a new benchmark for high-end audio applications and is a truly unique amplifier module for our DIY community. Combining the Nilai500DIY with the matching PS500DIY will result in the best possible ready-to-go DIY-experience possible! With the easy to follow instructions you will be able to realize a high end power amplifier at a fraction of the cost and all of this can be done in just 30-60 minutes. Combined with our DIYclassD PreAmplifier kit you can create a complete set of superbly sounding equipment. All you need to bring to the table is this box and a few tools: • Wire cutter (or combination plier)• 5.5 mm hex nut driver (or combination plier) • 7 mm hex nut driver (or combination plier) • 3.5 mm flat type screwdriver Warranty: 5 years / 20.000h FEATURES: • THD+N: 0,00015% (-116dB) @ 100W / 4Ohm / 20.000Hz • Output noise: 9,5µV @11,8dB gain • Gain adjust in 3 steps (11,8 - 21,8 and 27,8) • High fidelity components • Discrete buffer stage and regulators • Dedicated high-end power supply PS500DIY included SPECIFICATIONS: Inputs • 1 x Trigger 12V • 2 x Balanced XLR Outputs • 2 x Goldplated Bindingpost Set (Banana plug, Spade plug or Bare wire) CONTENTS OF PACKAGING: • Complete stereo case • 2x Nilai500DIY amplifier module • 1x PS500DIY Power Supply • Complete internal cable harness • Complete mounting set • Nilai500DIY stereo kit user assembly guide • Nilai500DIY stereo kit user manual Also available in a 500W mono kit 

€1,225.00
UcD400 stereo kit
The DIYclassD UcD400 stereo kit is probably the best and most easy way to get a high-end HiFi system in your livingroom for a very affordable price. The KIT is designed with an easy to use mindset. Anyone can build it and enjoy the sound in the shortest time possible. Everything is there: 2pcs UcD400 with HxR, SMPS400A400, chassis, cables. You don't even need to solder, we did it for you. Internal size: 193mm(W) x 58mm(H) x 265mm(D) External size: 200mm(W) x 79mm(H) x 280mm(D) (size incl feet, excl connectors) THIS KIT CONTAINS Complete Hypex DIY case 2pcs UcD400HG with HxR SMPS400A400 Complete internal cable harness Mounting plate All required connectors All required mounting materials Complete comprehensive manual NOT INCLUDED IN THE KIT: Power cable Loudspeaker cables Interconnects Tools as described in the manual

€577.50
UcD180 stereo kit
The DIYclassD UcD180 stereo kit is probably the best and most easy way to get a high-end HiFi system in your living room for a very affordable price. The KIT is designed with an easy to use mindset. Anyone can build it and enjoy the sound in the shortest time possible. Everything is there: 2pcs UcD180 with HxR, SMPS400A180, chassis, cables. You don't even need to solder, we did it for you. Internal size: 193mm(W) x 58mm(H) x 265mm(D) External size: 200mm(W) x 79mm(H) x 280mm(D) (size incl feet, excl connectors) THIS KIT CONTAINS • Complete Hypex DIY case • 2pcs UcD180HG with HxR • SMPS400A180 • Complete internal cable harness • Mounting plate • All required connectors • All required mounting materials • Complete comprehensive manual NOT INCLUDED IN THE KIT: • Power cable • Loudspeaker cables • Interconnects • Tools as described in the manual

€525.00